Storm Water – Flows To Waterways Stencil – 100mm to 300mm

Reusable “STORM WATER FLOWS TO WATERWAYS” stencil, laser cut in our Brisbane workshop for road, car park, warehouse and factory floor marking. Every stencil has a solid border so paint lands on the stencil, not your surface, and cuts cleanly with road paint, line-marking aerosols or a roller.

Letter height is the height of each character, not the size of the stencil. The wording is set across 5 lines with a 50 mm border all round, so the sheet you receive is larger — the table below is what actually arrives.

Finished stencil sizes

Mylar comes on a 1400 mm roll, so the largest sizes are supplied as registered panels that line up on the ground rather than as a single sheet. The registration marks are cut in, and the table says which sizes those are.

• Commercial Mylar (0.35mm): translucent and flexible — lays flat, cleans up and is reusable job after job. Our recommendation.
• Polypropylene (0.8mm / 1.0mm): thicker and tougher — shrugs off solvents and rough site handling. Supplied in 2200 × 1240 mm sheets, so it is offered only on the sizes that fit one.

The photograph shows the smallest size in the table.

Not sure which material? Read the material comparison guide. Need different wording? The Custom Text Stencil Designer prices any text instantly.