Emergency Vehicle Access Stencil – 100mm to 600mm
Reusable “EMERGENCY VEHICLE ACCESS” stencil, laser cut in our Brisbane workshop for road, car park, warehouse and factory floor marking. Every stencil has a solid border so paint lands on the stencil, not your surface, and cuts cleanly with road paint, line-marking aerosols or a roller.
Letter height is the height of each character, not the size of the stencil. The wording is set across 3 lines with a 50 mm border all round, so the sheet you receive is larger — the table below is what actually arrives.
Finished stencil sizes
| Letter height | Finished stencil | Supplied as | Polypropylene |
|---|---|---|---|
| 100 mm | 1080 × 480 mm | Single piece | Yes |
| 200 mm | 2061 × 860 mm | Single piece | Yes |
| 300 mm | 3041 × 1240 mm | Single piece | — |
| 400 mm | 4022 × 1620 mm | 2 registered panels | — |
| 500 mm | 5002 × 2000 mm | 2 registered panels | — |
| 600 mm | 5982 × 2380 mm | 2 registered panels | — |
Mylar comes on a 1400 mm roll, so the largest sizes are supplied as registered panels that line up on the ground rather than as a single sheet. The registration marks are cut in, and the table says which sizes those are.
- Commercial Mylar (0.35mm): translucent and flexible — lays flat, cleans up and is reusable job after job. Our recommendation.
- Polypropylene (0.8mm / 1.0mm): thicker and tougher — shrugs off solvents and rough site handling. Supplied in 2200 × 1240 mm sheets, so it is offered only on the sizes that fit one.
The photograph shows the smallest size in the table.
Not sure which material? Read the material comparison guide. Need different wording? The Custom Text Stencil Designer prices any text instantly.
Tax excluded. Shipping calculated at checkout.
Why Tinkable?
- 📍 Brisbane Made: Every order cut & engraved in-house.
- 🎖️ Veteran-Family Owned: 10.5 years of Defence service values.
- ✅ Proof before cutting: Nothing is made until you approve it.
- 🚀 Fast Turnaround: Reliable shipping Australia-wide.
Choose options