{"product_id":"uv-laser-marking-test-and-quote","title":"UV Laser Marking — Material Test and Firm Quote","description":"\u003cp\u003eSend us a sample part and we will mark it, photograph the result and quote the job. UV marking works cold — the beam breaks the surface bond rather than burning through it — so it marks materials a CO₂ laser scorches, melts or distorts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat this buys\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA real test mark on your actual part, not a swatch of something similar\u003c\/li\u003e\n\u003cli\u003ePhotographs of the result, so you can judge contrast and legibility before committing\u003c\/li\u003e\n\u003cli\u003ePower, speed and frequency settings recorded against your material, so a repeat run is identical\u003c\/li\u003e\n\u003cli\u003eA firm price for the marking run, held for 30 days\u003c\/li\u003e\n\u003cli\u003eCredited in full against the job if you go ahead\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhy a test comes first\u003c\/h3\u003e\n\u003cp\u003eWhether a particular coating, alloy or glass takes a clean UV mark is not something anyone can tell you from a description. Two anodised parts from different suppliers can behave differently. Testing on your part is the only honest way to answer it, and it is cheaper than finding out on a production run.\u003c\/p\u003e\n\n\u003ch3\u003eWhat UV marks well\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodised aluminium\u003c\/strong\u003e — the anodised layer ablates to expose the metal, giving very high contrast without cutting into the part\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoated and bare metals\u003c\/strong\u003e — powder-coated, painted and plated finishes, with the coating removed cleanly and the substrate untouched\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcrylic and plastics\u003c\/strong\u003e — crisp marking with none of the melted, cloudy edge heat leaves behind; suits control panels, badges and thin components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass\u003c\/strong\u003e — fine surface marking with far less micro-fracturing than heat-based methods, which matters on drinkware and awards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeather\u003c\/strong\u003e — clean marking without the burnt smell and scorched halo a CO₂ laser leaves on hide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial numbers, QR codes and data matrix\u003c\/strong\u003e — sequential numbering and machine-readable codes, permanent and legible at small sizes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhen UV is the wrong answer\u003c\/h3\u003e\n\u003cp\u003eFor cutting acrylic or timber, and for ordinary engraving on drinkware and awards, our \u003ca href=\"\/en-nz\/collections\/laser-cutting\"\u003eCO₂ lasers\u003c\/a\u003e are faster and cheaper, and we will say so rather than sell you the dearer process. UV earns its place when the part is heat-sensitive, when the material would scorch, when the detail is fine, or when the mark must be permanent and machine-readable.\u003c\/p\u003e\n\n\u003ch3\u003eSending a sample\u003c\/h3\u003e\n\u003cp\u003ePost one part — more if the batch varies — with a note of the material and any coating, what you want marked and roughly what size, the quantity, and whether each piece needs a unique number or code. If it turns out your material will not take a usable UV mark, we tell you and refund this.\u003c\/p\u003e\n\n\u003cp\u003eMarked in our workshop at Eatons Hill in north Brisbane. Single pieces and production runs are both fine — there is no minimum.\u003c\/p\u003e\n\u003cp\u003eNot sure whether UV or CO₂ is right for your job? Tell us what the part is and what it has to survive — \u003ca href=\"\/en-nz\/pages\/contact\"\u003econtact us\u003c\/a\u003e, email \u003ca href=\"mailto:info@tinkable.com.au\"\u003einfo@tinkable.com.au\u003c\/a\u003e or call 0418 873 436, Monday to Thursday 9:00am–5:00pm and Friday 9:00am–1:00pm AEST.\u003c\/p\u003e\n\u003cstyle\u003e\na { text-decoration: none; color: #464feb; }\ntr th, tr td { border: 1px solid #e6e6e6; }\ntr th { background-color: #f5f5f5; }\n\u003c\/style\u003e","brand":"TINKABLE","offers":[{"title":"Default Title","offer_id":53037347897625,"sku":"UV-TEST","price":20.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0709\/0434\/8953\/files\/uv-laser-marking-test-and-quote.png?v=1791889447","url":"https:\/\/tinkable.com.au\/en-nz\/products\/uv-laser-marking-test-and-quote","provider":"Tinkable","version":"1.0","type":"link"}